How to Replace the Horseshoe Gasket on your EZ Bugler MouthpieceUpdated 4 months ago

To replace the silicone horseshoe on your EZ Bugler mouthpiece, follow these steps carefully:

1. Remove the Old Gasket – Since the silicone is very soft, gently slide a knife underneath the gasket and lift it out carefully. Take your time to avoid tearing it.

2. Prepare the New Gasket – Apply a small amount of saliva to both the mouthpiece and the new silicone gasket. This will help with a smoother installation.

3. Insert the Gasket – Using your fingers, press the gasket into the trough of the mouthpiece. To ensure it sits properly, take a small stick with a rounded or dull end and gently push the gasket into the pockets.

4. Reinstall the Reed – Place the reed back into the little pockets, making sure it is snug. Then, press down on the rounded side of the call to snap it into place securely.

Once everything is fitted correctly, your EZ Bugler is ready to go, and you're all set to get back to calling! Watch the video included below, as this will give you a video guide to replacing this gasket as well!